Dimensions/weights (approximate) in mm and kg

Weight

Spare parts

The spare parts available are shown in solid outline. Parts drawn

in broken line are not supplied as spares.

A A1 B

95 150 94

95 150 94

1"DN25 95 160 94 64 37 66 28

1.85

4.45

E Withdrawal distance

B

C

Size

1⁄2" DN15

3⁄4" DN20

C

E

64 37

F

G

Scrd/SW/BW Flgd

Available spares

Capsule and seat assembly set

Strainer screen Y-type cylindrical (1 off)

F

64 37

64 28

1.65

3.75

63 28

1.65

3.15

2, 3, 17, 18

5

7

13, 14

16

Steam traps

Balanced pressure

Set of cover gaskets

Sensor and sensor gasket

Adaptor gasket

How to order spares

(packet of 3)

(packet of 3)

Always order spares by using the description given in the column

headed 'Available spares' and state the size, model number and

capsule reference.

Example: 1 - Capsule and seat assembly set for a Spirax Sarco

DN25 IBPC32 having 'STD' fill capsule for operation at 12°C

below steam saturation temperature with integral Spiratec sensor.

A

9*

A1

G Withdrawal distance

Capacities

� ���

� ���

����

���

���

���

���

���

��

���

���������

�

� ���

��

����

Differential pressure bar (x 100 = kPa)

Hot water capacity

Cold water capacity

Safety information, installation and maintenance

For full details see the Installation and Maintenance Instructions

(IM-F01-30) supplied with the product.

Installation note:

The IBPC32 is designed for installation with the capsule in a

horizontal plane with the cover at the top.

It is recommended that a non-return valve is fitted when discharging

condensate into return lines where backpressure is experienced. It

is also recommended that a diffuser is fitted when discharging to

atmosphere.

For ease and maintenance, consideration should be given to fitting

isolation valves upstream and downstream of the steam trap.

Disposal

The product is recyclable. No ecological hazard is anticipated with

the disposal of this product, providing due care is taken.

How to order

Example: 1 off Spirax Sarco 1⁄2" IBPC32 carbon steel bodied

maintainable balanced pressure thermostatic steam trap. Screwed

BSP with 'STD' fill capsule for operation at approximately 12°C below

steam saturation temperature.

The trap will be supplied with an integral sensor to identify

waterlogging and steam wastage (WLS1 sensor) or for steam leakage

only (SS1 sensor). Sensors to be compatible with Spiratec indicators,

automatic monitors and test points:

R1 (single trap) remote test point, R12 (12 trap) remote test point,

Type 30 hand held indicator, R16C (16 traps) automatic steam

trap monitor or R1C (single trap) automatic steam trap monitor

with PNP/NPN output where appropriate.

17

2

5.2.34

18

3

7

������

��������

������

C

o

n

d

e

n

s

a

t

e

k

g

/

h

��������

IBPC32 Carbon Steel Balanced Pressure Thermostatic Steam Trap

with Integral Spiratec Sensor

TI-P005-06 ST Issue 4

* Note

Items 9 and 12

are not available as spares

Recommended tightening torques

5

16

12*

13

14

Item Part

3

Valve seat

9

Cover bolts

12 Sensor adaptor

14 Sensor

or

mm

N m

115 - 125

23 - 27

120 - 135

50 - 56

24 A/F

16 A/F

27 A/F

24 A/F

M10 x 30