Spirax Sarco - Catalogo Agosto 2017

Compressed air products

Isolation valves, drain traps and ancillaries

ISO 9001

9.5.7 TI-P148-15

ST Issue 4

MANAGEMENT

SYSTEMS

Cert. No. LRQ 0963008

Description

The CA10S is a float type automatic liquid drain trap for air and gas

systems. It has a cast iron body and cover with stainless steel valve

head for use on high temperature or where corrosive condensate

would adversely affect a rubber valve.

Sizes and pipe connections

3⁄4" screwed BSP (BS 21 parallel) or NPT.

A 1⁄2" tapping is provided for a balance pipe.

Optional extras

Drain cock tapping:- The cover can be drilled and tapped

or NPT to enable a drain cock to be fitted.

Limiting conditions

Body design conditions

PMA Maximum allowable pressure

TMA Maximum allowable temperature

TMO Maximum operating temperature

∆PMX Maximum differential pressure

Designed for a maximum cold hydraulic test pressure of 24 bar g

Operating range

��

∆PMX - Maximum differential pressure

Depending on the specific gravity of the liquid being drained.

CA10S

Air and Gas Trap

1⁄2" Tapping

for balance pipe

" BSP

PN16

16 bar g

220°C

14 bar

8 11 9 7 3

12 5

6 10

��

Pressure bar g

The product must not be used in this region.

Specific gravity

∆PMX bar

Material

No. Part

1 Body

2 Cover bolts

3 Cover gasket

4 Cover

5 Valve seat

1.0

14.0

0.9

13.8

Material

0.8

11.7

0.7

0.6

8.6

5.0

Capacities

��

Cast iron

Steel

Reinforced exfoliated graphite

��

DIN 1691 GG 20

BS 3692 Gr. 8.8

Cast iron

Stainless

The product is available with material certification to EN 10204 2.2

for body and cover as standard.

DIN 1691 GG 20

BS 970 431 S29

BS 1449 304 S11

6 Valve seat gasket

Pivot frame assembly

set screws

8 Ball float and lever

9 Pin

10 Support frame

11 Pivot frame

steel

��

BS 6102 Gr. A2

��

steel

Class 50

BS 1449 304 S16

��

Valve cone

B 970 431 529

BS 1449 304 S16

��

BS 1449 304 S16

��

* 12

* Note: The valve cone of the CA10S is permanently attached to the

ball float and lever

��

Certification

Differential pressure bar (x 100 = kPa)

Local regulations may restrict the use of this product to below the conditions quoted.

In the interests of development and improvement of the product, we reserve the right to change the specification without notice.