Paw - 01/2024

Equipment for modular sytem DN 20

Safety set DN 20 (3⁄4"), up to 50 kW

for distribution manifolds DN 20,

with self-sealing counter T-piece

3⁄4" x 1⁄2",

outlet 3⁄4" with cap for expansion tank,

pressure relief valve

1⁄2" x

3⁄4", 3 bar, up to 50 kW,

pressure gauge 0-4 bar

5257

Cutting-ring compression fitting DN 20 (3⁄4"), d = 15 mm

Cutting-ring compression fitting DN 20 (3⁄4"), d = 18 mm

Immersion sleeve

1⁄2" ext. thread x T = 30 mm

self-sealing, with o-ring, polished brass, for sensor, T = 30 mm

Immersion sleeve

1⁄4" ext. thread x T = 60 mm

standard, chromed brass, for sensor, T = 60 mm

Immersion sleeve

1⁄2" ext. thread x T = 60 mm

standard, chromed brass, with valve extension (25 mm), for sensor, T = 60 mm

Immersion sleeve

1⁄2" ext. thread x T = 100 mm

standard, chromed copper, for sensor, T = 100 mm

01/2024 • Printed in Germany

PAW GmbH & Co. KG • info@paw.eu • www.paw.eu

561215

561218

566001

566002

5660021

566003

Cutting-ring compression fitting DN 20 (3⁄4"), d = 22 mm

3⁄4" external thread, self-sealing with o-ring, with support sleeve, suitable for soft copper

pipes. For temperatures up to 150 °C.

561222

Immersion sleeve

1⁄2" ext. thread x T = 150 mm

standard, chromed copper, for sensor, T = 150 mm

For all immersion sleeves: for the installation of the temperature sensors (d = 6 mm) in

the storage tank, in the collector and the hydraulic separator.

Attention: suitable for ball valves until 2016!

566004

PAW actuator SR2

Easy assembly and disassembly thanks to the smart PAW snap-in mechanism, with 1.5 m

cable and mounting set for halting assembly on the PAW mixing valve, for weather-

compensated control, due to the removable scale it is suited for flow on the right or left

side, change-over switch for manual / automatic operation

Electrical connection: 230 V - 50 Hz (705013), 24 V - 50/60 HZ, DC 24 V (705015)

Input power: 1 W (705013), 0.5 W (705015)

Torque: min. 2 Nm

Setting time for 90°: 105 s (705013), 100 s (705015)

705013

Connection set for diaphragm expansion tank - DN 20 (

3⁄4")

for assembly to distribution manifolds DN 20,

with tank connector

3⁄4",

wall bracket and mounting equipment,

armoured hose with bend

3⁄4" x 700 mm,

maximum tank diameter = 440 mm

7509

Contact thermostat 20-60 °C

Contact thermostat for limiting the flow temperature, adjustable from 20 - 60 °C

N00083