Jika - 2021

The main component of gelcoat shower trays is limestone, which in

conjunction with resins gives the possibility of creating a product with

a subtle minimalist design.

the shower trays smooth surface ensures highly hygienic environment

the surface is easy to clean and maintain

the material is resistant to mechanical damage and UV radiation

in case of surface damage the product can be repaired

thanks to the low height of the product, it can be installed both on the

floor and together with the floor“

acrylic products of Jika brand are made of 100% acrylate

warm surface and good insulation properties

colour stability

easy maintenance

Jika steel bathtubs are produced from a steel strip with a thickness of

1,5 to 1,8 mm or 2,5 to 2,8 mm. After shaping on special presses, 3 layers

of enamel are applied to the material. Each layer of enamel is then fired in

a furnace.

Jika steel products made of enamelled steel are hygienic, resistant to

acids, scratches as well as abrasion

it is not subject to change of colour or shape

practically unlimited lifetime if properly maintained

The surfaces, which the bathtubs and shower trays are made of, are not difficult to clean and care. Smooth surface barely

catches dirt. For regular maintenance, we recommend using a sponge, a soft cloth and a small amount of antistatic

detergent. Avoid using abrasives or solvents that damage the product surface. Remove strong dirt by a household liquid

cleaner such as dishwashing detergent or soap. In the event of damage to the product surface, repair is possible using

a repair kit. The surface should always be repaired by a specialist only.

Hard

neutral

soft