1.3 USER WARNING

S

• This appliance is not intended for use by children under 8 years of age or by persons with reduced physical

,

sensory or mental capabilities unless they are supervised by an adult.

• The unit is not intended to be used as a toy. It is recommended to avoid any improper use or behaviour that

could compromise the safety or correct operation of the unit.

• In the case of installations with a power plug, never connect the unit to multiple power sockets as this could

cause a

fi re

.

• In the event that the power cable is damaged, due to deterioration or breakage by external agents, remov

e

the power supply to the system and immediately request its replacement by qualifi ed personnel.

• Cleaning and maintenance that the user can perform must not be performed by children or by people wit

h

reduced physical, sensorial or mental capabilities

.

• During maintenance and cleaning operations, always disconnect the power supply in order to avoid electri

c

shock or electrocution

.

• Do not wash the unit with water to avoid damaging the electrical components

.

• After removing the fi lters or the outer casing of the unit, do not touch the fi ns or the fans to avoid injury.

• Do not use fl ames or hair dryers to dry the battery as it could deform or catch

fi re.

• Maintenance must be carried out by qualifi ed technical personnel such as, for example, the Authorized

Technical Service Centre which in this sense is a guarantee of qualifi cation and professionalism to avoid

damage to property and people or to the unit itself.

• In the event of an anomaly, breakdown or imperfect operation, the appliance must be deactivated and an

authorised company must be called (for example the Authorised Technical Service Centre, which has spe-

cifi c technical training and original spare parts). Therefore, refrain from any intervention or attempt at repair.

• Do not insert

fi ngers or objects into the air inlet or outlet to avoid physical injury and damage to the units.

• Do not block the air outlet or inlet of the unit to avoid malfunction or damage to it.

• If the unit is operated in abnormal conditions, it may be damaged, operate improperly, cause electric shocks

or fi res

.

• Do not climb on or place heavy objects on the unit as the unit may break, be damaged or malfunction.

1.4 INSTALLER WARNING

S

• In accordance with current legislation, the systems must be designed by qualifi ed professionals, within the

dimensional limits established by law.

• Installation and maintenance must be carried out in compliance with current regulations, according to the

manufacturer’s instructions and by authorized and professionally qualifi ed personnel, meaning those with

specifi c technical expertise in the systems sector, as required by law.

• During installation, all safety regulations relating to electrical and plumbing systems must be followed. It is

necessary to follow the safety regulations of the premises and provide appropriate protection systems on the

electrical power circuits.

• A circuit breaker of adequate size must be provided in order to protect the system from any overloads and

short circuits.

• At least one sectioning switch of adequate size must be provided that sections each individual phase and an

y

neutral wire. Or a removable and easily accessible power plug at the end of the installation

.

• The system must be securely connected to an adequate earth system as failure to do so could cause shock,

electrocution or malfunctions of the units.

• Install power cables of adequate section before using the system.

• Use only certifi ed power cables and communication cables.

• A power supply with a frequency and/or voltage different from that expected or with unstable values, o

r

incorrect wiring will cause malfunctions of the system or damage to the units.

• Connect the phase cable(s), any neutral cable and the earth cable to the unit power terminal block.

• Always make sure that the power supply is disconnected before carrying out any work on the electrica

l

connections and, in any case, always follow all the relevant safety procedures.

• Do not power the system until the installation is complete.

• If the power cable or communication cables are damaged, they must be replaced by qualifi ed personnel.

• Keep a distance or use appropriate insulation between the power and communication cables and the ga

s

pipes as the high temperatures of the pipes could damage the cables

.

• The installation must be carried out in compliance with the requirements of IEC, NEC and CEC or equivalent

and only by qualifi ed personnel

.

28