Atlas Concorde - Magazine

Atlas Plan Magazine 2025

Technical specification

162x324 cm - 63

”x127

”

NOT RECTIFIED SLAB

159x324 cm - 62

”x127

”

NOT RECTIFIED SLAB

160x320 cm - 63”x126”

RECTIFIED MONOCALIBER

Complies with

EN 14411 (ISO 13006)

Appendix

Group

Bla

(

)

The permissible deviation, in % or mm, of the average size for each tile (2 or 4 sides) from work size (WS).

(

)

The permissible deviation, in % or mm, of the average thickness for each tile from the work size thickness (WS).

(

***

)

The maximum permissible deviation from straightness, in % or mm, related to the corresponding work sizes (WS).

(

****

)

The maximum permissible deviation from rectangularity, in % or mm, related to the corresponding work sizes (WS).

c.c. The maximum permissible deviation from centre curvature, in % or mm, related to diagonal calculated from the work sizes (WS).

e.c. The maximum permissible deviation from edge curvature, in % or mm, related to the corresponding work sizes (WS).

The maximum permissible deviation from warpage, in % or mm, related to diagonal calculated from the work sizes (WS).

(1)

Determination of slip resistance of pedestrian surfaces; it does not cover sports surfaces and road surfaces for vehicles (skid resistance).

(2). Anti-slip performance is guaranteed at the time of delivery of the product.

(3). However, tiles with a DCOF of 0.42 or greater are not necessarily suitable for all projects. The specifier shall determine tiles appropriate

for specific project conditions, considering by way of example, but not in limitation, type of use, traffic, expected contaminants,

expected maintenance, expected wear, and manufacturers’ guidelines and recommendations.”

(4). For further details, please refer to outdoor design general catalogue.

(5). Only for products with 20 mm thickness.

Technical features

Technical specifications

Requirements for nominal size N

162x324 cm - 63

”x127

”

159x324 cm - 62

”x127

”

Not Rectified

160x320 cm - 63”x127”

Rectified

N ≥ 15 cm

Silk

Matte

Hammered

Leathered

Polished

Satin

Silk

Matte

Hammered

Polished

(%)

(mm)

Regularity

characteristics

Structural

characteristics

Bulk

mechanical

characteristics

Surface

mechanical

characteristics

Thermal and

hygrometric

characteristics

Physical

properties

Chemical

characteristics

Safety

characteristics

(1)(2)

Length and width

Thickness

Straightness of sides

Rectangularity (Measurement only

on short edges when L/l ≥ 3)

Surface flatness

Water absorption

Breaking strength

Modulus of rupture

Impact resistance, as coefficient of restitution

Resistance to deep abrasion of unglazed tiles

(removed volume)

Coefficient of thermal linear expansion

Thermal shock resistance

Moisture expansion (in mm/m)

Frost resistance

Reaction to fire

Resistance to household chemicals and

swimming pool salts

Resistance to low concentrations

of acids and alkalis

Resistance to high concentrations

of acids and alkalis

Resistance to staining

ISO

10545-2

ISO

10545-3

ASTM

C373-18

ISO

10545-4

ISO

10545-5

ISO

10545-6

ISO

10545-8

ISO

10545-9

ISO

10545-10

ISO

10545-12

ISO

10545-13

ISO

10545-14

± 0,3 (*)

± 5 (**)

± 0,3 (***)

± 0,3 (****)

c.c. ± 0,4

e.c. ± 0,4

w. ± 0,4

± 1 (*)

± 0,5 (**)

± 0,8 (***)

± 1,5 (****)

c.c. ± 1,8

e.c. ± 1,8

w. ± 1,8

N.A.

Suitable for

Conforme

N.A.

Suitable for

≤ 0,1 %

≤ 0,5 %

12 mm -> S ≥ 3500N

20 mm -> S ≥ 10000N

R ≥ 40 N/mm

≥ 0,55

Suitable for

≤ 7 MK

-1

Resistant

≤ 0,01% (0,1mm/m)

Resistant

Resiste

≥ 1,0 N/mm

(Class C2 - EN 12004)

A1 without fiberglass - A2 with

fiberglass

Suitable for

≤ 0,1 %

≤ 0,5 %

S ≥ 1000N

R ≥ 40 N/mm

≥ 0,55

Suitable for

≤ 7 MK

-1

Resistant

≤ 0,01% (0,1mm/m)

Resistant

Resiste

≥ 1,0 N/mm

(Class C2 - EN 12004)

E ≤ 0,5% Individual max 0,6%

Requirement ANSI A137.1

Water Absorption Max ≤ 0,5%

S ≥ 700 N

S ≥ 1300 N

for thickness < 7,5mm

for thickness ≥ 7,5mm

R ≥ 35 N/mm

Declared value

Pass according to EN ISO 10545-1

Declared value

Pass according to EN ISO 10545-1

A1 or Afl

Declared Class

A1 - A1fl

Bond strength/adhesion for improved

cementitious adhesives

1348

Declared value

Dynamic coefficient of friction (DCOF)

Resistance to scratching

Tendency to retain dirt

Surface resistance to cold liquids

Surface resistance to wet heat

Surface resistance to dry heat

Assessment of resistance to impact

ANSI A 326,3

UNI EN

15186:2012 met.B

UNI 9300:2015

UNI EN

12720:2013

UNI EN

12721:2013

UNI EN

12722:2013

ISO 4211-

4:1988

CEN/TS 16209 Class A

No visible change (5)

CEN/TS 16209 Class A

Maximum drop height

according to thickness

dry

CEN/TS 16209 Class A

No visible change (5)

CEN/TS 16209 Class A

Maximum drop height

according to thickness

≤ 175 mm

Minimum Class B (B for unglazed tiles)

≤ 0,01 mg/dm

≤ 0,1 mg/dm

≤ 0,01 mg/dm

≤ 0,1 mg/dm

Release of dangerous substances:

Cadmium (in mg/dm

) and Lead (in mg/dm

)

ISO 10545-15

Declared value

Shod Ramp Test

DIN EN 16165

ANNEX B

(EX DIN

51 130)

Declared Class

Barefoot Ramp Test

DIN EN 16165

ANNEX A

(EX DIN

51097)

Declared Class

Coefficient of friction (COF)

B.C.R.A.

Rep. CEC/81

D.M. 236/89 dated 14/06/89

>0,40 for leather sliding element on dry flooring

>0,40 for hard rubber sliding element

on wet flooring

N.C.

> 0,40

dry

> 0,40

wet

> 0,40

dry

< 0,40

wet

DCOF

> 0,42