Compressed air products
Filter / regulators
MPC1M
MPC2M
9.4.7
S
S
S
S
S
OE
S
OE
OE
OE
OE
OE
OE
OE
OE
Optional extras
Airsets
The MPC2M, MP2AM filter / regulators are also available as airsets,
consisting of Type 8 or FK21 bracket, mounting ring and pressure
gauge (see the 'MPC_M optional extras' table below).
MPC optional extras - Selection table
S = Supplied as standard OE = optional extra
Feature
= not available
MPC2AM
S
OE
OE
OE
OE
OE
OE
Without drain
With manual drain
With manual drain
With autodrain
With locking seal
50 mm Ø
40 mm Ø
Type 8 mounting bracket
FK21 fixing kit
Aluminium mounting ring
Polycarbonate
bowl
Bowl guard
Metal bowl
(no sight glass)
Tamper-proof
cap
Pressure gauge
Note: A tamper-proof cap with locking seal is recommended
as an optional extra for MPC2M and MPC2AM airsets.
Tamper-proof cap
(Standard on MPC1M)
Dimensions
(approximate) in millimetres
Ø37
51
Type 8 mounting bracket and mounting ring
For general installation.
The filter / regulator can be mounted using this zinc plated mild steel
bracket and aluminium mounting ring. Both items must be specified
when placing an order.
Dimensions (approximate) in millimetres
38
31
FK21 fixing kit
12.7
12.7
5
10
29
64
51
Optional pressure gauge (Not for MPC2AM)
Available in two sizes (11⁄2" and 2"), with 3 pressure ranges. The
face is marked in both bar and psi. Please state, size and pressure
range when placing an order.
The FK21 fixing kit is required to mount the MPC_M onto the
Spirax Sarco range of PN pneumatic actuators. The aluminium
mounting ring must also be specified.
0 to 2 bar
0 to 7 bar
0 to 11 bar
0 to 30 psi
0 to 100 psi
0 to 160 psi
Dimensions (approximate) in millimetres
30.5
Ø8.2
40
32
61.5
Pressure ranges
Dimensions (approximate) in millimetres
R"
11⁄2" version 47 mm
2" version 45 mm
MPC1M, MPC2M, MPC2AM Monnier
High Efficiency Compressed Air Filter / Regulators
0
11⁄2" version 40 mm
0
2"
version 48 mm
Page 2 of 4
TI-P504-07 CH Issue 2
1
0
2
b
a
r
6
8
4
5
0
