Pipeline ancillaries

Bellows sealed stop valves

Local regulations may restrict the use of this product to below the conditions quoted.

In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2015

TI-P137-18

ST Issue 6

BSAT and BSA

Bellows Sealed Stop Valves

Description

BSA6T shown

A range of sealed, in-line stop valves having twin ply bellows as standard throughout the range. These valves have been designed for

use on steam, gas, liquid, condensate and water systems.

The standard BSAT range comes complete with throttling plug and locking device.

The alternative BSA range has a flat disc.

The Tables on page 2 clearly display the available sizes, pipeline connections and available options for the standard and alternative ranges.

Standards

The product fully complies with the requirements of the European Pressure Equipment Directive 97/23/EC and carries the

mark

when so required.

Certification

The BSA1 and BSA1T is available with a manufacturer's Typical Test Report.

The BSA2, BSA2T, BSA3, BSA3T, BSA6T and BSA64T is available with certification to EN 10204 3.1. Note: All certification/inspection

requirements must be stated at the time of order placement.

Page 1 of 10

7.1.4