Product range CoolBloC

Combined heating and cooling circuits

All CoolBloCs offer

the following advantages:

• Pump group for heating and cooling

• Condensation-resistant valves and fittings:

high-quality components to avoid oxidation

• Special pump with additional insulating element

for the use in special ambient conditions, such as dewing or

condensate formation

• Thermal separation of the actuator and the mixing valve

to avoid condensate formation

• Sealing lips protected by the utility model in the insulation

to reduce condensate formation

The pump groups are ideally suitable for the use in combination

with heat pumps.

Cooling – Application during the summer:

•

A heat sink (f. ex. a heat pump) provides cooled fluid.

•

The cooling circuit transports the heated fluid to the interior spaces.

•

There, a heat transfer takes place and the fluid is cooled down.

•

The cooled fluid is heated again in the heat source.

Heating – Application during the winter:

•

A heat source (f. ex. a heat pump) provides heated fluid.

•

The cooling circuit transports the heated fluid to the interior spaces.

•

There, a heat transfer takes place and the fluid is cooled down.

•

The cooled fluid is heated again in the heat source.

D

N

2

5

01/2020 • Printed in Germany

156

PAW GmbH & Co. KG • 31789 Hameln • Germany • Phone: +49-5151-9856-0 • Fax: +49-5151-9856-98 • info@paw.eu • www.paw.eu