La Direttiva Europea 2005/32/CE (denominata Eco-Design) ha come
obiettivo quello di rendere le abitazioni più efficienti dal punto di vista
energetico favorendo quindi lo sviluppo, la valorizzazione e l’integrazione
delle fonti rinnovabili e la diversificazione energetica, dando la preferenza
alle tecnologie a minore impatto ambientale (si stima che le caldaie
possano contribuire per il 15% al target europeo di riduzione della CO
2
).
Essa stabilisce che a partire dal 26 Settembre 2015 i produttori di
caldaie non possano più immettere sul mercato apparecchi che non siano
a condensazione; l’obbligo non comporta quindi il ritiro dal mercato delle
caldaie di tipo tradizionale. Potranno dunque ancora essere installate caldaie
non a condensazione purché la data di fabbricazione risulti antecedente al
26 Settembre 2015.
Le caldaie a condensazione sono generatori di calore in grado di
recuperare in buona parte il calore che viene ceduto all’impianto di
riscaldamento, contenuto nei fumi e che andrebbe altrimenti disperso
dal camino; esse possono anche essere utilizzate in abbinamento
ai sistemi per lo sfruttamento di energie rinnovabili. Si parla di un
rendimento del 100% contro il 92% delle caldaie tradizionali.
Queste ultime dunque non rientreranno più nelle nuove etichettature
energetiche previste dalla normativa.
Tale etichettatura regola gli standard minimi di efficienza per le caldaie;
gli apparecchi per riscaldare gli ambienti domestici avranno infatti una
classificazione da G sino ad A++. Gli apparecchi per la produzione
di acqua sanitaria avranno una classificazione che va da G ad A.
La sostituzione della caldaia da “tradizionale” a “condensazione”
comporta sia modifiche alla canna fumaria (vedi ns. catalogo
Fumisteria), sia una manutenzione all’impianto esistente. Per questo
Tecnogas vi offre i giusti prodotti per un’accurata manutenzione
degli impianti e per migliorare così prestazioni e consumi.
Non esitare a consultarci per ogni esigenza tecnica o commerciale.
IMPIANTI DI P
foc
< 350kW
Gli impianti termici di P
foc
< 350kW nuovi, ristrutturati o sui quali viene
sostituito il generatore di calore a partire dal 25/06/2009 DEVONO essere
dotati di sistemi di trattamento dell’acqua secondo lo schema seguente.
SOLO RISCALDAMENTO, durezza temporanea acqua ≥ 25°f:
• per gli impianti con P
foc
≤ 100 kW è richiesto soltanto il
CONDIZIONAMENTO CHIMICO (con il condizionamento chimico si evita
il deposito delle incrostazioni, ma non varia la durezza, ed i valori pur
rimanendo maggiori di 25°f, sono ritenuti a norma);
• per gli impianti con P
foc
> 100 e < 350 kW è richiesto l’ADDOLCIMENTO
(solo con l’addolcimento la durezza diminuisce).
RISCALDAMENTO E (o solo) produzione di ACQUA CALDA SANITARIA,
durezza temporanea ≥ 15°f:
• per gli impianti con Pfoc ≤ 100 kW è richiesto CONDIZIONAMENTO
CHIMICO e la FILTRAZIONE;
• per gli impianti con P
foc
>100 kW e < 350 kW è richiesto
l’ADDOLCIMENTO e FILTRAZIONE.
IMPIANTI DI P
foc
≥ 350kW
Per gli impianti nuovi installati a partire dal 01/08/1994 con P
foc
≥ 350kW si
devono seguire, come previsto dall’art.5 c.6 del DPR 412/93, le indicazioni
della UNI 8065:1989 di seguito riportate.
Se SOLO PRODUZIONE ACS, obbligatoriamente filtrazione e:
• se durezza temporanea < 25°f: condizionamento chimico o trattamento
di addolcimento;
• se durezza temporanea ≥ 25°f: trattamento di addolcimento e, se
necessario, anche il condizionamento chimico.
Se PRODUZIONE ACS e (o solo) RISCALDAMENTO, obbligatoriamente
filtrazione e:
• se durezza totale < 15°f: condizionamento chimico;
• se durezza totale ≥ 15°f: condizionamento chimico e addolcimento.
The European Directive 2005/32/CE (Eco-Design) aims to make
homes more efficient in terms of energy thus promoting the development,
enhancement and integration of renewable energy sources and energy
diversification, giving preference to technologies with low environmental
impact (it is estimated that the boilers will contribute 15% to the European
target of reducing CO
2
).
It states that from September 26th 2015 boiler manufacturers can no
longer place on the market appliances that are not condensation; the
obli-gation does not therefore withdraw traditional boilers from the market.
Not condensing boilers therefore still be installed not provided the date of
man-ufacture is prior to September 26th, 2015.
Condensing boilers are heat generators able to recover in good part the
heat that is transferred to the heating system, contained in fumes and which
would otherwise be lost from the stack; they may also be used in conjunction
with system for the exploitation of renewable energy. There is talk of a return
of 100% against the 92% of traditional boilers.
The latter therefore no longer fall in the new energy labeling required by law.
This labeling rules the minimum efficiency standards for boilers; appliances that
heat the home environment will have rating from G up to A++. Devices for
the production of sanitary water will have a classification that goes from G to A.
The replacement of the boiler from “traditional” to “condensation” entails
both changes to the chimney and maintenance to the existing plant.
For this Tecnogas offers the right products for a careful maintenance
of the plants and thus improved performance and fuel economy.
Do not hesitate to contact us for any technical or commercial.
P
foc
PLANTS < 350kW
The thermal plants of P
foc
< 350kW new, restructured or on which replaces
the heat generator from 25/06/2009 should be equipped with water treat-
ment systems according to the following scheme.
HEATING ONLY, water hardness ≥ 25°f:
• for systems with P
foc
≤ 100 kW is required only CHEMICAL CONDITION-
ING (with the chemical conditioning prevents the deposit of scale but
does not change the hardness and values while remaining greater
than 25 ° f, are considered under);
• for systems with P
foc
>100 and <350 kW is required SOFTENING (only
by softening the hardness decreases).
HEATING AND (or only) production of DHW, hardness ≥ 15°f:
• for systems with Pfoc ≤ 100 kW is required FILTRATION and CHEMICAL
CONDITIONING;
• for systems with P
foc
> 100 and <350 kW is required FILTRATION and
SOFTENING.
P
foc
PLANTS ≥ 350kW
For new plants installed since 01/08/1994 with P
foc
≥ 350kW must be fol-
lowed, as expected art.5 c.6 of Presidential Decree 412/93, the indications
of UNI 8065: 1989 below.
If ONLY PRODUCTION DHW, obligatorily filtration and:
• if hardness < 25°f: chemical conditioning or softening treatment;
• if temporary hardness ≥ 25°f: softening treatment and, if necessary,
also the chemical conditioning.
If DHW PRODUCTION and (or only) heating, obligatorily filtration and:
• if the total hardness <15°f: chemical conditioning;
• if the total hardness ≥ 15°f: chemical conditioning and softening.
TECNOGAS Programma ACQUA 2023/ WATER program 2023