Micropaints.

featuring The Painting Makers Co.

ISTRUZIONI DI APPLICAZIONE

Accertarsi, prima dell’applicazione, che il supporto sia

perfettamente asciutto e stagionato, pulito, senza infiltrazioni di

muffe, funghi, batteri ecc.

Preparazione del supporto:

Applicazione su esterni: si consiglia l’applicazione su intonaci a

base di calce.

In caso di intonaci rovinati, procedere all’asportazione e

ripristinare le superfici con nuovi intonaci.

In caso di supporti sfarinanti applicare preventivamente una

mano di CLEAR CONSOLIDATOR diluito con acqua in proporzione

1:1 per consolidare la superficie.

Si consiglia di inumidire sempre le superfici prima

dell’applicazione dei prodotti a base di calce per favorire la

reazione di ancoraggio.

Si consiglia l’applicazione di un protettivo idrorepellente per

evitare l’assorbenza caratteristica di una superficie a base calce.

Applicazione su interni: applicare direttamente su intonaco civile

e/o vecchie pitture minerali purché non sfarinanti, in buono stato

e sufficientemente ruvide.

In caso di supporti sfarinanti applicare preventivamente una

mano di CLEAR CONSOLIDATOR diluito con acqua in proporzione

1:1 per consolidare la superficie.

Su supporti quali gesso, scagliola, cartongesso, pitture sintetiche

ecc. applicare preventivamente MULTIPURPOSE FINE PRIMER

W-170-A1.

•

Applicare una mano di Rasato Minerale con frattone d’acciaio

per il riempimento del supporto.

livellare la superficie.

Scheda Tecnica

Technical Feature

Micropaints.

featuring The Painting Makers Co.

AVVERTENZE E CONSIGLI

•

Prima di procedere all’applicazione, assicurarsi che il supporto

sia perfettamente asciutto e stagionato e sia perfettamente

ancorato al substrato; che non presenti sporco, unto,

contaminazione da muffe, funghi, batteri, sali o quant’altro

possa compromettere l’adesione o la buona riuscita del lavoro.

•

Conservare gli imballi al riparo dal gelo (minimo +5°C);

conservare in luogo fresco, asciutto ed al riparo dal sole.

•

Utilizzare il prodotto a temperatura ambientale e del supporto

compresa tra +8°C e +30°C e con umidità relativa non

superiore al 75%.

•

Evitare che l’essiccazione avvenga a temperatura dell’ambiente

e del supporto inferiore a +5°C.

•

Non applicare con il rischio di pioggia imminente, in pieno sole,

in presenza di forte vento, o con nebbie persistenti.

•

Proteggere le superfici da pioggia battente o depositi

superficiali di acqua o altre sostanze per il tempo necessario

alla completa stagionatura del prodotto.

•

Predisporre il lavoro in modo da poter dare esecuzione

continuativa all’opera fino a interruzioni architettoniche al

fine di evitare il formarsi di giunti, sormonti e differenze di

colorazioni.

Scheda Tecnica

Technical Feature

Modalità di applicazione:

Application procedure:

APPLICATION INSTRUCTIONS

AWARNINGS AND ADVICE

Make sure, before application, that the substrate is perfectly dry

and seasoned, clean, without the infiltration of mold, fungus,

bacteria, etc.

Support preparation:

Application on exteriors: we recommend the application on lime-

based plasters.

In the case of damaged plasters, proceed with the removal and

restore the surfaces with new plasters.

In the case of chalking substrates, first apply a coat of CLEAR

CONSOLIDATOR diluted with water in a 1: 1 proportion to

consolidate the surface.

It is advisable to always dampen the surfaces before applying the

lime-based products to favor the anchoring reaction.

We recommend the application of a water-repellent protective to

avoid the absorbency characteristic of a lime-based surface.

Application on interiors: apply directly on civil plaster and / or old

mineral paints as long as they are not chalking, in good condition

and sufficiently rough.

In the case of chalking substrates, first apply a coat of CLEAR

CONSOLIDATOR diluted with water in a 1: 1 proportion to

consolidate the surface.

On substrates such as plaster, scagliola, plasterboard, synthetic

paints etc. apply beforehand MULTIPURPOSE FINE PRIMER

W-170-A1.

•

Apply a coat of Rasato Minerale with a steel trowel to fill the

support.

surface.

•

Before proceeding with the application, make sure that the

substrate is perfectly dry and aged and is perfectly anchored

to the substrate; that does not present dirt, grease, mold

contamination, fungi, bacteria, salts or anything else that could

compromise the adhesion or the good result of the work.

•

Keep the packaging away from frost (minimum + 5 ° C); store in

a cool, dry place away from the sun.

•

Use the product at ambient temperature and at a substrate

between + 8 ° C and + 30 ° C and with relative humidity not

exceeding 75%.

•

Avoid drying at room and substrate temperatures below + 5 ° C.

•

Do not apply with the risk of imminent rain, in full sun, in the

presence of strong wind, or with persistent mists.

•

Protect surfaces from driving rain or superficial deposits of

water or other substances for the time necessary for complete

curing of the product.

•

Prepare the work so as to be able to carry out the work

continuously up to architectural interruptions in order to avoid

the formation of joints, overlaps and color differences.

•

Lasciare essiccare.

•

Applicare una seconda mano di prodotto allo stesso modo per

•

Allow to dry.

•

Apply a second coat of product in the same way to level the

DATI TECNICI

Essiccazione a 20°

Aspetto del film essiccato

Granulometria

Residuo secco a 105°

pH

Solvente

(per il prodotto fresco)

Permeabilità al vapore

(DIN 52615)

Conservabilità

al tatto

in profondità

2-3 ore

36 ore

Levigato, traslucido

Diametro max 0,5 mm

73% ± 1%

12

Acqua

Sd= 0,298m

(spessore 3,4 mm)

μ =87,6

24 mesi

TECHNICAL DATA

Drying at 20°

Appearence of dried film

Granulometry

Dry residue at 105°

PH

Solvent

(for fresh product)

Vapour permeability

(DIN 52615)

Conservation

to the touch

in depth

2-3 hours

36 hours

Polished, translucent

Max diameter 0,5 mm

73% ± 1%

12

Water

Sd= 0,298m

(3,4 mm thickness)

μ =87,6

24 months

Progettomicro. Catalogue 2020

168

Micro.

169

CLASSIFICAZIONE SECONDO D. LGS N.161 DEL 27.03.2006

Rasato minerale

a) pittura opaca per pareti e soffitti interni;

Valore limite c.o.v. in g/l: dal 01.01.2010 = 30 g/l

Valore max c.o.v. nel prodotto: 20 g/l di preparato

CLASSIFICATION ACCORDING TO LEGISLATIVE DECREE N.161

OF 03.27.2006

Rasato minerale

a) matt paint for interior walls and ceilings;

Limit value V.O.C. in g/l: from 01.01.2010 = 30 g/l

Value max V.O.C. in the product: 20 g/l of preparation